Badass Moto UTV Fire Extinguisher Mount. Roll Cage Holder with Stainless Steel D-Rings Fits Polaris RZR, Can-Am, Kawasaki, Honda, Yamaha 1.7–2.25 inch Bars. No Tools Needed Non-Scratch SxS Accessories

The Badass Moto UTV Fire Extinguisher Mount is a heavy-duty strap-style holder designed specifically for UTV and Side-by-Side roll cages measuring 1.75” to 2.25” in diameter. Unlike flimsy mounts that rely on plastic clips or thin elastic, this mount features stainless steel D-ring buckle hardware and six reinforced polyester oxford straps that wrap firmly around both the extinguisher and your roll cage tube. 1.5-inch padded non-slip backing strip sits between the mount and your cage, designed to help prevent the holder from rotating or sliding — and to help protect your cage finish from scratches. No tools, no drilling, no permanent modifications. Wrap the straps, cinch the buckles, and you’re set. Sized for standard 2.5 lb fire extinguishers like the Kidde FA110 (extinguisher not included). Compatible with Polaris RZR, Ranger, and General; Can-Am Maverick, Commander, and Defender; Kawasaki Teryx and KRX; Honda Talon and Pioneer; Yamaha YXZ, Wolverine, and Viking; CFMOTO ZForce and UForce; Arctic Cat Wildcat; and most other UTVs with standard roll cage tubing. Whether you’re trail riding, managing ranch property, hauling hunting gear, or heading out with the family, having a fire extinguisher mounted and accessible on your roll cage is a practical addition to any off-road setup. The weather-resistant and UV-resistant fabric is built to handle sun, rain, dust, and mud season after season. Badass Moto is a USA-based family-operated powersports brand, Est. 2014. Trusted by 250,000+ riders. We design ride-ready gear that solves real problems — because we ride too.

• FITS UTV, ATV, SxS & SIDE-BY-SIDE ROLL CAGES: This fire extinguisher holder fits 1.7" to 2.25" roll bar and roll cage tubes on UTVs, ATVs, side-by-sides, four wheelers, 4 wheelers, quads, and offroad vehicles. Works with Polaris RZR, Ranger; Can-Am Maverick, Defender; Kawasaki Teryx, KRX; Honda Talon, Pioneer; Yamaha YXZ, Wolverine; CFMOTO and more. Sized for 2.5 lb extinguishers like Kidde FA110 (sold separately). Does not fit 5 lb extinguishers.
• STAINLESS STEEL D-RINGS — NOT PLASTIC BUCKLES OR UGLY METAL BRACKETS: Cheap mounts use plastic clips that crack. Aluminum brackets can scratch and dent your roll cage, add weight, and require tools and drilling. Our off-road fire extinguisher mount uses stainless steel D-ring hardware with six reinforced straps — non-scratch, lightweight, no tools needed. Just wrap your roll bar, cinch, and go.
• NO TOOLS, NO DRILLING — INSTALLS IN ABOUT 60 SECONDS: Skip the stripped screws and overtightened clamps that come with aluminum bracket mounts — which can actually dent or compress your roll cage tubing. Our strap-and-buckle design wraps directly around your roll cage tube — adjust, cinch, done. Mount it behind the seat, on the rear cage, on the A-pillar, or wherever works for your rig. Move it between mounting positions or between vehicles in seconds. No modifications, no permanent changes to your cage
• BUILT FOR THE TRAIL, THE RANCH, AND EVERYWHERE IN BETWEEN: Whether you ride desert dunes on your RZR, manage property on a Ranger, haul gear on a hunting rig, or take the family out on weekend trails, keeping a fire extinguisher within reach just makes sense. Weather-resistant and UV-resistant polyester fabric is designed to hold up through seasons of sun, rain, dust, and mud. A great addition to your off-road camping kit, ranch equipment, or work vehicle setup. Also fits most 1 liter water bottles for a second use on the trail.
• BADASS MOTO — RIDE READY GEAR SINCE 2014: Badass Moto is a USA-based family-operated powersports brand trusted by over 250,000 riders since 2014. We design gear that solves real problems for real riders — because we ride too. Each UTV fire extinguisher mount includes: One 6-strap mount with stainless steel D-ring hardware, and padded non-slip backing strip (pre-attached). If it’s not right, reach out — we’ll make it right.
• EXTENSIVE VEHICLE COMPATIBILITY: Fits Polaris RZR, ranger; Can-Am Maverick, Commander; Kawasaki Teryx4, Ridge; Honda Talon, Pioneer; Yamaha Wolverine, Viking, Rhino; CFMOTO UForce, ZForce, Arctic Cat Wildcat. Fits 1.7 to 2.25 inch round roll cage and profile roll bar tubes.
• FIRE EXTINGUISHER FIT DETAILS: Sized for 2.5 lb ABC extinguishers including Kidde FA110, FA110G, Amerex B417T, First Alert HOME1 — approximately 3.25 inch diameter. Does not fit 5 lb or larger. We recommend the Kidde FA110 for most UTV and ATV riders. Extinguisher sold separately. Also fits mnay 1-1.5 liter water bottles.
• WHY STRAPS BEAT ALUMINUM BRACKETS: Metal bracket mounts can dent cage tubes from overtightening, weigh 8-16 oz, rattle when loose, and clamp so tight they slow emergency access. Our strap mount weighs about 4 oz, cinches securely with stainless steel D-rings, looks amazing on your rig, and lets you grab your extinguisher fast.
• FITS ROLL CAGE AND ROLL BAR TUBES 1.7 TO 2.25 INCHES: Works with factory and aftermarket cages on two-seat and four-seat UTV, SxS, side-by-side, ATV, quad, and four wheeler models. Off road fire extinguisher holder and offroad roll bar mount for powersports vehicles.
• DESIGNED FOR CONVENIENT ACCESS IN AN EMERGENCY: Your extinguisher stays secured on rough terrain but pulls free when you need it Fast — no clamps to fight, no knobs to twist. Just lift and grab. Note: this is a recreational strap-and-buckle mount, not a rigid bracket. It holds firmly but is not a substitute for a permanently bolted mounting system in competiton, commercial or high-impact applications.